Free CCNA | Wireless Configuration | Day 58 | CCNA 200-301 Complete Course

Welcome to Jeremy’s IT Lab. This is a free, complete course for the CCNA. If you like these videos, please subscribe to follow along with the series. Also, please like and leave a comment, and share the video to help spread this free series of videos. Thanks for your help. In this video we will look at wireless LAN configuration.

In the past three videos we covered a lot of theory about wireless networks. Finally we’ll get hands-on and see how to actually build a wireless LAN. We will cover exam topics 2.7, 2.8, and 2.9. 2.9 in particular tells us what we need to be able to configure for the CCNA exam. In addition, we will cover exam topic 5.10 which tells us we need to configure WLANs

using WPA2 PSK, pre-shared key, using the GUI. Note that both topics 2.9 and 5.10 mention that we must use the GUI, graphical user interface. Up to this point in the course we have only been using the CLI, command line interface, to configure devices. You can configure wireless LANs via the CLI too, but it’s much more common to use the

GUI, and that’s what Cisco expects you to know for the exam. Here’s what we’ll cover. First I’ll give an introduction to the network topology I’ll be using for today’s demonstration. Then I’ll cover the necessary switch configurations, since we’ll be connecting all devices to one central switch. Then I’ll show the basic wireless LAN controller setup, so we will be able to access its GUI

and do the configurations you need to know for the CCNA. Then I’ll show how to configure the WLC’s interfaces, and then we’ll configure some wireless LANs. Finally I’ll take a look at some additional features on the WLC. There’s a lot to explore in the WLC and you only need to know the basics, so I’ll