YouTube Instagram TikTok How it works FAQ

The fastest way to turn talking videos into clean, searchable text. Free, private and no account required.

About

Built by Rishav Raj with one goal: free transcripts for everyone.

rishav@yttotranscript.com

Transcribe

YouTube to text
YouTube with timestamps
Instagram Reels
TikTok videos

Learn

How it works
FAQ
YouTube transcripts guide

More

Chrome extension
Contact
Privacy policy
Terms of service

© 2026 YTtoTranscript. Made for creators & researchers.

Not affiliated with YouTube, Instagram or TikTok. Respect creators’ copyright.

How To Edit Like @dhruvrathee On Phone — Transcript · YTtoTranscript

Home/Transcripts/YouTube

YouTube Transcript

How To Edit Like @dhruvrathee On Phone

Tube Sensei · 2,537 words · 13 min read · EN

Watch on YouTube

Share X LinkedIn WhatsApp

Below is the complete, readable transcript of How To Edit Like @dhruvrathee On Phone by Tube Sensei on YouTube. Read the full text, copy any part you need, or generate a transcript for any video with our free tool.

There are six editors, four of whom are video editors for the main channel, two for the blog channel, and two for writing subtitles. So, that's it. Now, you don't need six editors, nor a PC or laptop. In this video, I'm going to teach you how to edit like Dhruv Rathee on your phone. Dhruv's

videos mainly have these nine things that make his editing next-level. Today, I'm going to teach you these nine things so that you can also edit like Dr. Rathee on your phone. Be sure to watch this video till the end because I've also announced a giveaway at the end. So, without any delay, let's start. Number one:

Removing Backgrounds from Videos. First, you need to go to the KMA and choose the white canvas from the image assets. After that, you need to go to the layers and add your clip from the media browser and crop it perfectly. After that, you need to go to the KMA and enable it. If your

background is of a single color, after enabling it, adjust its settings so that your background is completely white. It should be removed properly and if your background is not plain then you can use Magic Remover under Chroma Key, this will remove your background very well, after this you have to duplicate your layer by clicking on the three dots and in Filters

you have to go to Mono and here you have to choose the first filter and then go to Adjustments and make the Brightness and Gain -100, after this adjust this shadow layer at the right place behind the character and then go to Effects, here choose Gush Blur from Basic Effects and stretch it on the entire canvas,

after this you have to send this effect backward so that it will affect only the shadow, now go to Settings and adjust the blur strength a little, now you have to choose the shadow layer and make its opacity around 90, now we will make our white canvas equal to the size of the clip and also make the effect

Transcribe another video

Paste any YouTube, Instagram or TikTok link to get a free transcript.

Free · No sign-up · Unlimited

Add to Chrome — transcribe in one click

equal to that, after this we have to choose the character layer and its Reduce the opacity to zero and export the video. I'll explain why. After this, return to the same project and delete the effect, as well as the shadow layer. Return the opacity of the character layer to 100. Select your white canvas and

replace it with your background video. To match the background, go to Filters and select b33. Go to Layers and bring back your exported video. Go to Split Screen and select Full Screen so that you don't make any alignment mistakes. Then click on the three dots to send this layer backward. Then go to Blending and select

Multiply. You can see that we have a shadow. Now go to Media and select Overlay and convert it from Split Screen to Full Screen. Then go to Blending and select Screen and select the three dots. We'll send it backward. This will give our background a perfect effect. Now we've covered the first two points, and here's the

output. Now the background and shadow are done, but let's see how to add a heading like this. Now we'll return to the same project and select Text from Layers. We'll type whatever heading we want to write, go to Font and give it a bold font. Then we'll adjust its size and go to the three-dot menu and send it backward.

After that, we'll duplicate it and go to Colors and select this color. We'll adjust the location a little, and export the video. This way, the heading will be added to your video. Let's take a look at the output. Now, it looks pretty good, but to give it a slightly more documentary-like effect, we'll return to the project

and delete everything except the symlinks and text. After this, we'll zoom in on the timeline and delete the left side of the background from where our text started. Which we can do by going to Trim. After that, we will bring the text to the beginning and put a split between both the texts,

which will give us two parts of the text. Now you have to choose the left part and go to Overall Animation and choose the flicker animation and you have to do the same thing with the text below. After this, you have to export it and come back to the main project. You can also come back to your main project by undoing.

After coming back, you have to go to the beginning of the text and split the background from there. After that, replace the clip on the right side and add the video which we had just exported. After importing the video, we will delete both the texts below, due to which we will get a final output like this.

Now, after covering all the three points, we move on to our fourth point which is Transition. First of all, you have to go to Media and add your next clip and then go to Layers and add this transition. The link is given in the description. After this, you You have to go to split screen

and make it full screen. After coming back, you have to go to blending and choose the screen option and this way our transition will be added, you just have to position it correctly. Now, if you've noticed in Rat's videos, they always have a glitch effect in the background. Now, let's see how to get this effect. First, you have to

go to the media store and then go to effects and search for prismatic. You have to download this effect. After that, come back and download any glitch slide. After this, you have to add your background and go to effects and first add an cliff and stretch it to the entire screen and also set the timeline.

After that, go to settings and keep its speed to zero, angle to zero, and distance to four. After coming back, you have to choose the prismatic effect and apply it to the entire screen. After that, go to settings and set its strength and quality to one. Then go to opacity and keep it around 20. After doing all this,

we can export our video, which will give you this output.

Now, one thing that makes DIY videos so engaging is these side textures that animate. So, let's learn how to create these. First, go to Video Assets and scroll down to the download layer layer. Then, go to your project and drag it from Video Assets to your timeline. Then, slide it slightly until you

find the line point. Then, go to Trim and Trim Left, and drag this layer to the starting point. After this, we'll go to Cropping and make it the size of a box and place it where we want to place it. Then, go to Text and type whatever text you want. Choose Font Roboto Black and

then set the size and position of that text. Now, our box has become a little too big, so we'll fix it by Cropping. After this, we'll duplicate this box and go to Adjustments and adjust the Gamma. - 100 and send it backward with three dots. After that, move this box slightly to the side and

downwards so that we get a nice effect. Then we will select our text and bring it forward so that our text is visible. Now our work is almost done. We will go to In Animations and give both boxes a wipe right animation. After this, we will select the text and go to In Animations and give it an enter slide up

animation. After this, we will select our boxes again and go to Out Animations and give it a wipe left animation which is the opposite of the animation. After selecting our text, we will give it a wipe down animation and our video will be made something like this. Now comes the main part of the video which

many of you want to learn: article highlighting. So first of all, you have to copy your sources and then go to Pixels and make your screen 169. Then, paste the headline you copied here and go to Colors and give it a dark color. After this, we Go to Font and choose Roboto Slab Regular.

After adjusting the alignment a bit, add a new text and paste whatever content you want to display in it. Go to Colors and give it the same color, but keep it slightly lighter. Then you need to go to Line Spacing and set it according to the length of the content. Then you need to set the text pacing.

After this, you need to make the background transparent and download the PNG. After this, we will go to Kine Master. After coming here, we will choose a dark background from the image assets. Then go to Layers and add our text. After this, download a picture of the person you want to display with the text and

remove their background by going to remove.bg and downloading it.

Come back to Kine Master and add this image. After placing it in the right place, you need to bring the text to the front and then choose the character layer and make it slightly lighter in Adjustments. After this, go to Layers. You need to choose the color you want to animate, and after spreading it across the screen,

click on Send Backward. After that, go to Opacity and reduce it slightly so that our character is visible. Now, if you want, you can also choose different colors by clicking on Color here. For now, I'll proceed with this color. Now, in this timeline, we'll delay our character's entry slightly and also make the color layer a little smaller.

After this, you need to choose your color layer and, going to In Animation, give it a fade animation and set the speed to 0.5. Then, you need to choose your character layer and, going to In Animation, give it a slide left animation and keep the speed around 0.7. After this, you need to make your text a

little smaller because we're going to use the Pan tool. Now, you need to make the first point where your color animation starts, and the second point a little further away, and make your text a little bigger. After this, you need to choose Highlighter from Layers. You have to do this and choose a square instead of a marker.

Then, after selecting the color of your choice, draw a rectangle on the screen and set it according to the text you want to highlight. For this, you can also reduce the opacity.

Then, after clicking on the three dots, send it backward. After this, choose the highlighting layer and in these animations, you have to add a wipe right animation. By repeating this process, you can also highlight some more lines and use different colors. After which, you will have something like this ready. Now you have learned to remove the background,

add a shadow, add text headings, background effects and transitions. You have also learned to highlight articles. But one thing that makes Dutty's videos different is his map animation. The kind of map animation he shows can only be created in After Effects, but I have found an alternative for you. You have to go to Play Stop and

search for TravelBoo and download this application. Then, Open the app and choose your starting point. For example, I'll choose London here. Then, for the destination, we'll enter the United States. You'll see a path. You can drag it to change its position. For example, if I want to go to the United States via Greenland,

I'll drag it to Greenland. After that, if you long-press on your vehicle, you'll also get the option to choose a vehicle. I'll choose a plane here. Then, click play, and our video will look something like this. You can also convert it to 16:9 by clicking here and set the animation duration. From here, after saving it to your gallery,

we'll go to K Ma and add it to our project. Now, if the transition is in the middle, we'll adjust it a bit.

After that, we'll go to filters and apply different filters to give it a nice look that blends with the rest of your video. You can see that there's a watermark here. To remove it, we'll use the pen and zoom. We'll zoom in a little bit on the end point and a little bit on the starting point so that the

watermark isn't visible. Your animation will look something like this.

Now, if you want your map animation to be exactly like Rathi's, please let me know in the comments section. I'll make a separate video for that, which will be longer, but will give you the exact same effect. Now, if you watch Rath's videos regularly, you'll have noticed that Rath also adds color to his maps. Now,

if you want to do this, you need to go back to the Play Store and search for "True World Maps." After downloading this application, open it. Now, any country you long-press on will be highlighted. You can highlight multiple countries and cities at once, take a screenshot, or record a screen, and use it in your videos.

You can even shift the highlighted area and resize it. If you want to change the side three-dimensional image, If you click on the dot, you can see different views along with the satellite view. With this, we have covered all our points. Now, this video is quite long and I did not talk about complexion effects.

Now, if you want a specific video on sound effects, then as soon as this video gets 200 likes, I will start making videos on that. Also, if you want to learn storytelling and direction like Rathi, then definitely write that in the comments and I will definitely make a video on that too. Now let's talk about the giveaway.

To participate in the giveaway, you will have to comment on this video and I will pick one comment through random AI and analyze its channel. I have 3 years of YouTube and will also tell you what you should do to grow. I will put all this in my community post. In this, you will get a promotion and

you will also get some guidance. There will be three winners of this giveaway and I will analyze only three channels. Now, if you are going to do editing like Dr. Rathi And if you think that your channel will go viral then you are still making a mistake. Before starting your new channel or

to make your old channel viral, you must watch this video. In this I have shared four points due to which your channel can go viral, so do not make the mistake of missing it.