Como hacer un sistema Hidropónico vertical #shorts

To make this vertical hydroponic system is a bit complicated, so a minute won't be enough, but let's try. Basically, I'm using PVC pipes, and what I do is heat them to make this mold, which is where the hydroponic basket will go. To do this, we heat the pipe first; we have to cut it a little so that it

fits and the nutrient solution will flow into it. This is basically where the water will touch our plants. This is the basic setup. This is the result of marking, cutting, and heating the pipe to be able to place the mold that will give shape to the hydroponic basket. Continuing with the system, we're going to use a

submersible pump that obviously raises the water a little higher than the size of our system. If our system is one meter, it should reach at least 1.20 or 1.30 meters. We'll add the baskets and place the plants in them. Obviously, we have to fill them with nutrient solution, and after about 20 or 25 days, we'll be

harvesting.